It’s a default login IP that is reserved for modems or wireless routers. By typing 10.0.0.2 within the address bar of our browser we’ll get access to the admin interface of our router. 10.0.0.2 is usually employed by brands like Zoom, Prolink, or Encore.
It’s not the only standard IP for routers. There are dozens of various IPs like 192.168.1.1, 192.168.0.1 or 192.168.2.1 that were wont to access our DSL Router, DSL Wireless Router or access point, DSL modem control board. Such a typical IP is additionally called Default Gateway IP.
10.0.0.2 IP
Not many people know their router IP because in most cases there is only one situation, we need the IP 10.0.0.2. That is while the setup process executed by a technician. So, we never get in contact with 10.0.0.2. But sometimes we want to change the SSID (WiFi network name), the WiFi-Password, or the parental controls. Then we need the IP 10.0.0.2. After logging into our router we’ll see the navigation panel where we are able to manage the data traffic, see statistics, and configure the router settings.
10.0.0.2 IP Features
- IP QoS: IP Quality of Service (IP QoS) enables us to prioritize, control, and gather accounting statistics. Using IPQoS, we can provide consistent levels of service to users of our network. So, a 10.0.0.2 router login allows us to set bandwidth for computers to avoid heavy load.
- DNS and Proxy Settings: Domain Name System ( DNS) is a network system of servers that translates a numeric IP address into a readable, hierarchical internet address that is it converts a domain name into the machine-readable address. Proxy means the agency for connection between two endpoint devices.
- WPS: Wifi protection system ( WPS) is a network security standard to create a secure wireless home network that helps make wireless communication faster, secure, and more efficient.
- MAC Address: It provides a unique address among the hardware devices connected to each other in a network.
- LAN, WAN & WLAN settings: It helps us configure different types of area-based networks. We can use 10.0.0.2 DNS for setting the safety settings.
- DHCP: Dynamic host configuration protocol allows the server to involuntary assign a different address in a sequential manner.
- PPPoE: Point-to-Point over Ethernet (PPPoE), is a protocol used to establish a DSL connection to the internet.
10.0.0.2 IP Requirements
We must be in the vicinity of our router’s network or should be connected to the same network as our router to be able to access the IP address. Since we cannot find this address on the world wide web, it’s important to be a part of the same network as our router. We also need a web browser.
Reasons for log in failure into 10.0.0.2 IP address
Many users make an error of using the incorrect IP address to urge the admin settings page, they’ll get a mistake which says “Web page not responding”. We should check if we are entering the right IP address for our router.
For Windows Users
- Go to Start
- Click on RUN and see the CMD ( command prompt)
- Once the command prompt, a black screen appears, just type IPconfig
- It will show we the IP address where we should try logging in
For MAC Users
- Go to search bar or just press Command+Spacebar
- Write terminal
- A terminal screen appears, type IPconfig
Alternate Option for MAC Users
- Open the Apple logo in the taskbar
- Click on option system preferences and search for Network,
- Once done, we will see our IP under the Status: Connected option
Now that we know our default gateway IP address, go to HTTP:// or 10.0.0.2 DNS (If this is our default gateway address), we will be able to see the login page.
What to do if we forget the router’s username and password
The best way to circumvent this from occurring would be if we have stored it somewhere else or have written it down. But in the worst-case scenario, we may have to force restart our router and restore factory settings.
To reset the router, search for the push button. The reset button is usually very small and hidden to avoid accidental resets. Press down on the reset button with a sharp object like a pin for 20-30 seconds. This will reset the router, and we can enter using default login details.
If we are still unsuccessful, contact our customer support.
How to Log into 10.0.0.2 IP Address?
- Open any browser and type http://10.0.0.2 in the address bar and press enter.
- As we press enter a login page will be opened. Enter the username and password.
- After we enter the login credentials, we will be directed to the router settings.
Login Steps to 10.0.0.2 IP Address
Follow these simple steps to log into our Router with a 10.0.0.2 IP address.
Connect router cable to our computer. (We can also use a wireless network). Double-check the device that we wish to work on is connected to the wi-fi. Pro Tip – it is a good idea to use a wired connection while making any changes. This avoids the risk of suddenly being logged off when we click the Save button.
- Open our chosen web browser and type the router’s IP address in the address bar. We can find it on the rear of our router packaging. If the address fails, we’ll need to grab our router manual. The IP listed as Default Gateway is that the correct one.
- It’s time to enter the default username and password of our router by accessing the admin panel. We can try the login credentials given below. The default values for admin are:
root | user | admin
If none of the above are successful, type our router’s name into our browser to locate the default login username and password we need. We should be directed to the models’ configuration page where the network and the router settings can be managed.
Default router user and password list
# | Username | Password |
1 | admin | epicrouter |
2 | admin | password |
3 | admin | zoomadsl |
4 | admin | admin |
5 | admin | Conexant |
6 | admin | administrator |
7 | blank | admin |
8 | admin | zoomvoip |
9 | admin | 1234 |
10 | admin | blank |
11 | admin | hamlet |
12 | blank | blank |
13 | blank | password |
14 | admin | trendchip |
How to Troubleshoot Router Errors?
We may face some unwanted issues when we enter the wrong username and password. Entering the right login credentials can resolve the issues. There can also be many other problems.
We may also get an error message while trying to login to the router admin page. This occurs if our router is a combination of a modem with a router and if the IP segment is the same as both, then the router will set its address to 10.0.0.1. Due to the conflict of IP address, we may face issues while logging in.
Also, we can face some kind of problem in assigning the client addresses in a WiFi router, where the network names and IPs are provided automatically to the user. This happens not in many cases and can sort out quickly. Most of the networks assign a personal IP address like 10.0.0.2 login dynamically using the DHCP.
Routers aren’t perfect and hence might not recognize whether the given address in their settings has already been previously assigned to a client before itself. In a coincidence, two separate devices on the same network will both have the 10.0.0.2 IP, resulting in a clash and connection error.
Conclusion
The IP address 10.0.0.2 could be a private IP address, mainly used for commercial purposes. The IP address employed by a router to permit internet access comes in IPV4 format i.e. 10.0.0.1 or 10.0.0.2. Likewise, many other IP addresses 10.0.0.2 is additionally employed by router brands.
Leave a Reply